General
| IM Order | ||
| Measurement Mode | ||
| Frequency Band | ||
| Single Band Desktop Type | ||
| Broadband Desktop Type | ||
| ANT Interface (DUT) | ||
| Display | ||
| Dimensions (mm) | ||
| Weight (kg) | ||
| Residual PIM (dBc) @ 2 x 43 dBm | ||
| Operating Temperature (°C) | Recommended | |
| Max. | ||
| Power Supply | ||
| Warm-up Time (min.) | ||
| 3rd, 5th, 7th, 9th |
| Reflected |
| LTE600, LTE700, LTE700L, LTE700U, APT700, AMPS, DigDiv, EGSM, LTE1400, DCS, PCS, AWS, TD-SCDMA F, TD-SCDMA A, UMTS, LTE2300, WiFi, LTE2600, WiMax3500 |
| One band measurement |
| One additional filter unit can be added |
| 7-16 female |
| Real-time measurement results on the screen |
| 450 x 400 x 200 |
| About 20 |
| <-168 |
| +15 - +25 |
| +0 - +45 |
| 100 – 240 V AC, 50/60 Hz, 650 W |
| 5 |
Transmitter
| Carrier Power At Testport (dBm) | ||
| Output Power Accuracy (dB) | ||
| Frequency Step (MHz) | ||
| Frequency Accuracy (ppm) |
| +30 - +45 |
| ±0.35 |
| 0.1 - 9.9, typ. 1 |
| ±2 |
Receiver
| Average Noise Floor (dBm) | ||
| Dynamic Range (dB) | ||
| Accuracy (dB) | ||
| Max. Operational Input Level (dBm) | ||
| Max. Survival Input Power (dBm) |
| <-135 |
| >70 typ. |
| ±1.0 typ., ±1.5 max. |
| -40 |
| +15 |
IM-SOFT System Software
| Measurement Mode | ||
| Adjustable Parameters | ||
| Test Result | ||
| Remote Control |
| Two tone Sweep |
| 2-Tone frequency Sweep frequency Frequency step Power level per carrier Correction value setting Limit settings |
| Display real-time test results Save data and load to create test report (TXT, XLS) Save test report (JPG, PDF) |
| USB |
