General
| IM Order | ||
| Measurement Mode | ||
| Frequency Band | ||
| Broadband Base Unit | ||
| Switch Matrix | ||
| ANT Interface (DUT) | ||
| Compact Structure | ||
| Weight (kg) | ||
| Residual PIM (dBc) @ 2 x 43 dBm | ||
| Operating Temperature (℃) | Recommended | |
| Max. | ||
| Power Supply | ||
| Warm-up Time (min.) | ||
| 3rd, 5th, 7th, 9th |
| Reflected or Reflected & Transmitted |
| LTE600, LTE700, LTE700L, LTE700U, APT700, AMPS, DigDiv, EGSM, LTE1400, DCS, PCS, AWS, TD-SCDMA F, TD-SCDMA A, UMTS, LTE2300, WiFi, LTE2600, WiMax3500 |
| Broad frequency range |
| Normally connect up to 6 filter units |
| 7-16 female |
| 19” standard, 32U |
| --- |
| <-170 |
| +15 - +25 |
| +0 - +45 |
| 100 – 240 V AC, 50/60 Hz, 1000 W |
| 5 |
Transmitter
| Carrier Power At Testport (dBm) | ||
| Output Power Accuracy (dB) | ||
| Frequency Step (MHz) | ||
| Frequency Accuracy (ppm) |
| +30 - +45 |
| ±0.35 |
| 0.1 - 9.9, typ.1 |
| ±2 |
Receiver
| Average Noise Floor (dBm) | ||
| Dynamic Range (dB) | ||
| Accuracy (dB) | ||
| Max. Operational Input Level (dBm) | ||
| Max. Survival Input Power (dBm) |
| <-135 |
| >70 |
| ± 1.0 typ., ± 1.5 max. |
| -40 |
| +15 |
IM-SOFT System Software
| Measurement Mode | ||
| Adjustable Parameters | ||
| Test Result | ||
| Remote Control |
| Two tone Sweep |
| 2-Tone frequency Sweep frequency Frequency step Power level per carrier Correction value setting Limit settings |
| Display real-time test results Save data and load to create test report (TXT, XLS) Save test report (JPG, PDF) |
| USB |
