General
| Display | ||
| Dimensions (mm) | ||
| Weight (kg) | ||
| RF Ports | RF Ports Base Unit | |
| RF Ports Filter Unit | ||
| User Interface Ports | ||
| Power Supply | ||
| Battery Life (min) | ||
| Frequency Stability (ppm) | ||
| 12.1” Touch screen, readable in direct sunlight |
| 410 × 327 × 173 |
| < 13.4, including batteries |
| 7-16 DIN (F) Test port (4.3-10 DIN on request) |
| P-SMP interconnect to Filter, N-Type (F) Isolation |
| 2 × USB, LAN |
| Battery powered or AC Mains supply (ext.) |
| 120 |
| ±2.5 |
PIM Analyzer RF (Base Unit)
| IM Order | ||
| Output Power (dBm) | ||
| Residual PIM (dBc @2x 43 dBm) | ||
| PIM vs. Distance Accuracy | ||
| PIM vs. Distance Range | ||
| Frequency Range (Seamless) (MHz) | ||
| Filter Units |
| 3rd, 5th, 7th, 9th, 11th |
| +26 - +49, equals +23 - +46 dBm at Testport |
| < -168 |
| < 0.3m, all bands Depends on number of PIM sources and accuracy of cable velocity factor |
| Down to -120dBm PIM, 0 - 150m |
| 698 - 2700 |
| Changeable to frequency bands |
Isolation Measurement
| Frequency | ||
| RF Output (dBm) | ||
| RF Input (dBm) | ||
| Isolation (dB) | ||
| Accuracy (dB) |
| Downlink frequency band of filter unit |
| +23 - +46 |
| +27 max operating |
| 0 - 60 |
| 1.5 |
VSWR/ Return Loss RF
| Frequency | ||
| VSWR | ||
| Return Loss (dB) | ||
| Distance to VSWR Fault Accuracy (m) | ||
| Distance to VSWR Fault Range (m) |
| Downlink frequency band of filter unit |
| 1.10 - 20.00 |
| 1.00 - 25 |
| 0.2 |
| 0 - 150 |
Spectrum Analyzer RF
| Frequency | ||
| Resolution Bandwidth (Hz) | ||
| Average Noise Floor (dBm) | ||
| Amplitude Accuracy (dB) | ||
| RF Input (dBm) |
| Uplink frequency band of filter unit |
| 120 - 20M |
| -135 DANL at 1 kHz |
| ±1.0 typ. |
| -40 max. operating |
